Canon EOS 20D Rear Case Replacement

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 3 Anleitungen, die diese beinhalten.

Englisch

Deutsch

Schritt 4 übersetzen

Schritt 4

Lift and remove the rear panel

When lifting the panel, make sure not to lift it too high, since you'll run the risk of tearing the cable, or damaging the connector on the board.
Flip the lock on the flex cable connector up with a spudger.
The front panel should pop off, now that the cable has been disconnected.
When reassembling the device, make sure to insert the left side of the front panel first, since it has a small lip that needs to fit under the left part of the camera case.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.