Zum Hauptinhalt wechseln

Dell Inspiron 700m Fan & Thermal Compound Replacement

Englisch
Deutsch
Schritt 27
Dell Inspiron 700m Fan & Thermal Compound Replacement, Inner RAM Module: Schritt 0, Bild 1 von 2 Dell Inspiron 700m Fan & Thermal Compound Replacement, Inner RAM Module: Schritt 0, Bild 2 von 2
Inner RAM Module
  • Two clips secure the RAM module in place, one on either side. Using your fingers, spread the clips away from the RAM module.

  • When released, the RAM module will pop up at a slight angle.

  • Lift the RAM module to an angle of about 30 degrees and slide it out.

  • When handling the RAM module, touch only the outside edges. Take care not to touch the gold contact points along the bottom edge.

  • To reinstall the RAM module, slide it in place at about the same angle until it is snug, and then swing it down until the two clips snap into place.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.