Motorola Moto E4 Screen (No Fingerprint Sensor) Replacement Schritt Nr.3 Verlauf

Änderungen an Schritt Nr. 3

Bearbeitet von Jeff Suovanen – 22. Aug 2019

Bearbeitung genehmigt von Jeff Suovanen

	[title] Create an opening gap
-	[* black] Apply a suction cup ~~close to~~ the heated edge of the phone.
-	[* black] Pull on the suction cup with strong, steady force to create a gap between the ~~display~~ and frame.
+	[* black] Apply a suction cup to the screen, near the heated edge of the phone.
+	[* black] Pull on the suction cup with strong, steady force to create a gap between the screen and frame.
	[* black] Insert the point of an opening pick into the gap.
-	[* icon_note] Due to the strong adhesive, this may take multiple attempts. If you ~~are having~~ trouble, ~~re-~~heat the edge for a minute and try again.
+	[* icon_note] Due to the strong adhesive, this may take multiple attempts. If you have trouble, heat the edge for another minute and try again.