Änderungen an Schritt Nr. 6
Bearbeitet von Carlos Ibanez –
Bearbeitung genehmigt von Carlos Ibanez
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* orange] Using the 10mm socket, remove the two bolts that connect to the wiring harness brackets on each side of the ignition coil. |
|---|---|
| + | [* orange] Using the 10mm socket, remove the two 12.7mm bolts that connect to the wiring harness brackets on each side of the ignition coil. |