Änderungen an Schritt Nr. 7
Bearbeitet von Carlos Ibanez –
Bearbeitung genehmigt von Carlos Ibanez
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Using a 10mm socket, remove the bolt holding the ignition coil. |
|---|---|
| + | [* black] Using a 10mm socket, remove the bolt holding the ignition coil. |
| [* black] Use a 16mm deep socket to loosen the spark plug inside the valve cover. | |
| [* black] Extend your magnet to retrieve the spark plug. | |
| [* icon_reminder] The 10mm bolt holding the ignition coil is longer than the other 10mm bolts. This bolt can only fit the ignition coil. |