Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 2

Bearbeitet von Ron Davis –

Bearbeitung genehmigt von Ron Davis

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Once the back panel has been removed, it is best to set it aside in a safe location.
-[* black] Locate the microphone. With the tablet facing down, the rear camera should be at the top of the tablet. The microphone is in the top right corner.
-[* black] Using the black spudger, insert the point underneath the red and black wires. Gently lift the microphone out of its socket.
+[* red] Using the black spudger, insert the point underneath the red and black wires. Gently lift the microphone out of its socket.
[* black] Where the red and black wires connect to the motherboard, use a soldering iron to remove the defective microphone.
-[* icon_note] If you have removed the microphone and cannot remember which wire went where, don't worry. The wire terminals on the motherboard are marked with a " + " and " - " sign.
+[* icon_reminder] If you have removed the microphone and cannot remember which wire went where, don't worry. The wire terminals on the motherboard are marked with a " + " and " - " sign.