Einleitung
Prereq to remove the heat sink.
Was du brauchst
-
-
Disconnect and remove the SATA data and power cables from the logic board.
-
-
-
Remove the four 12 mm T10 shoulder screws from the spring plate behind the CPU.
-
-
-
-
Remove the three 12 mm T8 Torx screws securing the GPU heat sink to the logic board.
-
Remove the three springs left behind.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.