Einleitung
Prerequisite to remove the speaker after the logic board.
Was du brauchst
-
-
Remove the following screws:
-
One 2.9 mm Phillips #000 screw
-
One 1.5 mm Phillips #000 screw
-
One 3.6 mm Phillips #000 screw
-
-
-
-
Lift the speaker and pull it toward the side of the phone to free this peg from the Lightning connector assembly.
-
Remove the speaker.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.