Einleitung

This is an easy way to quickly replace the side wheel of your Roomba. It is slightly more work than the front wheel, which can be found here, but is a straightforward process.

Ersatzteile

Kein Ersatzteil erforderlich.

Place your Roomba upside-down on a hard surface.
  • Place your Roomba upside-down on a hard surface.

If all you need off is the faceplate, skip all of the screwdriver-based steps, and just remove the dirt bin(step 7) and start from step 11 at the rear.

David Forrest - Antwort

While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
  • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

Kommentar hinzufügen

  • Gently pull upwards on the brush to remove it.

Kommentar hinzufügen

  • Rotate the Roomba upside-down so the bottom is facing towards you.

Kommentar hinzufügen

  • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

Kommentar hinzufügen

  • Carefully lift the bottom plate.

  • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

Kommentar hinzufügen

  • Find the blue wheel at the bottom of the Roomba, and unscrew the three captive screws holding it in place using a Phillips #1 screwdriver.

Kommentar hinzufügen

  • Gently lift the wheel to remove.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Deborah Newberry

Mitglied seit 23.01.2014

551 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 13-14, Regan Winter 2014 Mitglied von Cal Poly, Team 13-14, Regan Winter 2014

CPSU-REGAN-W14S13G14

4 Mitglieder

13 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 12

Insgesamt: 863