Repariere deine Sachen Community Store

Vierte iPhone Generation. Die Reparatur an sich ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. GSM mit 8, 16 oder 32 GB Kapazität, Modell A1332 in schwarz und weiß.

2396 Fragen Alle anzeigen

Einstellungen

New Replaced LCD doesnt work

Hi

I tried to fix my Black iPhone 4 with cracked screen . The screen does not even work , but itunes was detecting the iphone and it was charging.

I fix it , buying a new front white cover with lcd+dispaly.

When i just assembled the Iphone , the same problem was there , it turns on , the itunes detect the iphone , it charges and the thouch is working , but the display dont , so i cant see any image. Any idea ?

Thnks all

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung -1
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

Ricardo, hold your phone so that you have an angled light source to the LCD. See if there are any shadows etc. It is possible that your backlight IC/coil are no longer working. Of course, that only applies if you double checked everything else, like your connector etc.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

3 Kommentare:

There no light coming from the display .

Is it an display part problm or can it be any board problem ?

Thnks

von

If you already replaced the display, and if you think it is a good display, then it would be a board issue. Check on questions like this. there are a few other issues that could be at fault, but they are even more involved.

von

What you mean with backlight ? I cant see any light! Totaly off , is This the back light ?

von

Einen Kommentar hinzufügen

Einstellungen

The fix if both Logic Board and LCD are OK is Reset, hold both home and power buttons until the iPhone begins to restart. If still problem then one of the two is faulty.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

I almost did the reset and unsucessed , soi just tried to put on the iPhone a working board and they worked perfectly ,so the problem is the board....i need to replace the ic or the coil ?

http://guide-images.ifixit.net/igi/NRPSX... , http://guide-images.ifixit.net/igi/YHFIQ...

tutorial

http://www.youtube.com/watch?v=Bsk6rg0KX...

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Ricardo wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 2

Insgesamt: 450