Zum Hauptinhalt wechseln

Modell A1312 / Mitte 2010 / 3.2 GHz Core i3 oder 2.8 & 3.6 GHz Core i5 oder 2.93 GHz Core i7, ID iMac11,3

382 Fragen Alle anzeigen

Replacing the video synchronisation cable

Hello,

Unfortunatly while tearing down my new iMac (to change the Internal HardDrive) something went wrong (%&#* clumsiness lol) and the 4 pin synchronisation video cable was scratched (which link the 27" screen and the board to left of the alimentation unit).

Does anyone know where I can find some replacement cable ? I've looked everywhere unsuccessfully :-(

Thanks a lot for any response !

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 1
1 Kommentar

Thanks for your response.. i've looked on the apple site and call a tech center. Unfortunatly degradations due to bad manutention break the warranty as i supposed :-(

I've managed to "fix" the cable but a new one would not be luxury lol

Here again, any clue would be very helpfull, thanks !

von

Einen Kommentar hinzufügen

4 Antworten

Gewählte Lösung

This machine was still under warranty. Parts will be very hard to find as it is so new. It might still be covered if it was in the original condition.

War diese Antwort hilfreich?

Bewertung 2
Einen Kommentar hinzufügen

Apple's part number for the VSYNC cable for this model is 922-9161, hope this helps.

Chris

War diese Antwort hilfreich?

Bewertung 2
Einen Kommentar hinzufügen

I "googled" it but no relevant result :-( I'll keep the part N° however and thanks for the intell ;-)

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

Applecomponents 64NE FARRAGUT ST. PORTLAND OR. 97211-2206 . I purchased this cable from them.Best of luck!

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

fpeliss wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 7

Letzte 30 Tage: 8

Insgesamt: 2,130