Repariere deine Sachen Community Store

Zweite Generation des WiFi iPads, erschienen am 11. März 2011. Modell Nummer A1395. Reparatur ist schwierig und verlangt Hitzezufuhr.

250 Fragen Alle anzeigen
Frage geschlossen

Einstellungen

Replaced Power/Volume Flex Cable and only the mute switch works

I am repairing this iPad2 for a student ( BYOD) and the smashed the digitizer and broke the power/volume/mute flex cable.

I replaced Digitizer and Swapped with Different Flex Cable of same type... After evaluating the device I noticed the Power Button Nor Volume buttons work but the Mute Switch Does?

I am beginning to think that the flex cable is bad still though it looks in good condition. ( Ordering new cable just in case).

Just looking for some outside perspective on this issue.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
1 Kommentar

I replaced the Flex cable with a brand new one and the volume and mute switch work fine but still the power button does not work and the cable is in perfect condition.

von

Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

Have you tried just reseating the cable?

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

1 Kommentar:

Yea a few times.

von

Einen Kommentar hinzufügen

Einstellungen

You should also inspect the logic board port that the volume flex cable plugs into with magnification, it's easily damaged by unplugging the flex because of the factory tape, luckily if it is damaged that is a small, separate, replaceable part of the logic board on the ipad 2.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

1 Kommentar:

Ill check that today, I have an extra from a dmged ipad i can try to swap with it.

von

Einen Kommentar hinzufügen
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 240