Zum Hauptinhalt wechseln

Zweite iPhone Generation. Modell A1241 mit 8 oder 16 GB Kapazität und schwarzer oder weißer Kunststoff-Rückseite. Die Reparatur ist leichter zu bewerkstelligen als beim iPhone 1. Es werden Schraubendreher, Hebelwerkzeuge und Saugnäpfe benötigt.

1169 Fragen Alle anzeigen
Frage geschlossen

Identify part that fell out when repairing

After following the step by step instructions on replacing broken glass a small silver piece and circular part fell out. It has the letters h-f on it. Can you tell me what this is and where they belong?

It fell out right after step 6. when I disconnected ribbons 1,2,3. and removed the glass from the mother board.

Block Image

A larger view of the part.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
1 Kommentar

Post an image of your part with your question. It will make it a lot easier to identify.

von

Einen Kommentar hinzufügen

2 Antworten

Hilfreichste Antwort

Hello! It is the "MIC" of iPhone 3G. Show u as below pictures.

It belongs to complete dock assembly replacement. So I think you need to replace this spare part.

Here is the replacement part , http://bit.ly/1bLJiwc . You can know more at this website.

Hope will help you.

Block Image

Block Image

Block Image

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

can you make the picture bigger?

War diese Antwort hilfreich?

Bewertung 0

2 Kommentare:

also you didnt mention at whatpoint it fell out

von

I cant find a place for it either, could it have come from somewhere on the broken glass screen? I would try finishing the repair as normal and seeing if it works then troubleshoot it from there. If it turns on, check all the settings and buttons and make sure they are working.

von

Einen Kommentar hinzufügen
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 9

Insgesamt: 99