Zum Hauptinhalt wechseln

7,9 Zoll Display / Modell A1432 / Verfügbar in schwarz und weiß / Angekündigt am 23. Oktober 2012 / 16, 32 oder 64 GB Speicherkapazität

220 Fragen Alle anzeigen

LCD flickering after digitizer replacement. Tried new LCD, still same.

The LCD had no issues when the customer brought in the ipad mini. When I replaced the digitizer, the lcd was all greyed out and 2 black lines running down the middle. I assumed it was a bad LCD so I tried a new one and the same problem persists. Could this be a board issue? If so, is there a fix?

Tried hard reset, same issue.

Original LCD http://imgur.com/tonBntl

New LCD http://imgur.com/NZk3zeS (red is to protect customors identity, not on actual lcd)

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

2 Antworten

This is probably a logic board issue. What most likely happened is that a connector was damaged. You may need to replace it.

War diese Antwort hilfreich?

Bewertung 0

Kommentare:

Thanks, that's what we thought. We'll try apple and see what they have to say.

von

Einen Kommentar hinzufügen

Were you able to fix your problem? I am confronting the same issue. The screen is flickering(the image jump and jump all over the screen) Both LCD I have tested so far are broken inside, so I don't know if this flickering is caused by the broken LCD or by the connector.

Let me know, thanks!

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Robert wird auf ewig dankbar sein.
Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 1,038