Zum Hauptinhalt wechseln

CDMA Version des iPhones der vierten Generation. Die Reparatur ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. Modell A1349 mit 16 oder 32 GB, CDMA Kompabilität.

295 Fragen Alle anzeigen
Frage geschlossen

Error 4005 with iPhone 4

Error 4005 upon restore, not mycomputer it is the iphone that is having the problems, replaced battery and still does not restore with same error. Any ideas?

4005 is hardware, what should I replace?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

Hey Johnny,

I got this error while trying to restore in recovery mode this morning, I put the device in actual dfu mode and the restor went through!

To put your device in dfu follow these instructions excatly.

1. Plug your phone into your computer and power it off.

2.Hold the power button for three seconds (until the apple logo comes up)

3. Without releasing the power button hold the home button for ten seconds (3 seconds after the apple logo dissapears.)

4. Continue to hold the home button for 15 seconds (Your computer should start installing usb drivers.)

Then try your restore again!

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

Ive tried this to no avail. Found it it has water damage on top...selling it now lol

von

Einen Kommentar hinzufügen

According to Apple: "This may happen if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state."

Check out the following page for suggested next steps (or you just might skip ahead to trying a different USB cable):

http://support.apple.com/kb/TS5314

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

Im no newbie...ive done it all thanks anyways. Any others?

von

Einen Kommentar hinzufügen
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,545