Zum Hauptinhalt wechseln

Vierte iPhone Generation. Die Reparatur an sich ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. GSM mit 8, 16 oder 32 GB Kapazität, Modell A1332 in schwarz und weiß.

2375 Fragen Alle anzeigen
Frage geschlossen

Gear wheel look-a-like piece left over after iPhone 4 repair.

I was following the fix it to change the power lock button, and when I removed the power lock button, then these two parts fell out. I figured out where the large piece go, but I simply can't find any images that shows a gear wheel look-a-like that I am missing.

I put the phone together and I tried to start it up, however after it showed the black screen with the apple, it never went further. So I am guessing that I need that piece.

(I then took the phone apart, and I was a bit rough with the larger piece and it's loop broke. However that is not the cause of the problems, as the problems were there before I broke it.)

iPhone 4 Einschalttaste und Sperrtaste austauschen

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Block Image

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

Is the screw hole missing here?

Block Image

War diese Antwort hilfreich?

Bewertung 1

1 Kommentar:

You are right it was the right one. Thanks a lot!

von

Einen Kommentar hinzufügen

That like gear thing looks like a screw hole take a pic of the mother board and I can confirm this.. And you really should have taken the screen out when repairing this as bending the lcd cable forward like that is only asking for trouble

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

Thanks for considering my questions. I can't see any missing on the mother board. But do take a look, I have uploaded a couple pictures of the logic board.

von

Einen Kommentar hinzufügen
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 58