Zum Hauptinhalt wechseln

Zweite iPhone Generation. Modell A1241 mit 8 oder 16 GB Kapazität und schwarzer oder weißer Kunststoff-Rückseite. Die Reparatur ist leichter zu bewerkstelligen als beim iPhone 1. Es werden Schraubendreher, Hebelwerkzeuge und Saugnäpfe benötigt.

1158 Fragen Alle anzeigen
Frage geschlossen

Sleep button unresponsive-Restore question

My 3G sleep button is not responding. My question is if I try to restore, will the phone completely restart at the end or just shut down leaving me with no way to power back up?

Thanks for any help!

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
1 Kommentar

Thanks for the help anchor, I'll give it a shot

von

Einen Kommentar hinzufügen

9 Antworten

Gewählte Lösung

No it will stay on after a restore. Make sure you back it up. Best way to do that it to select password protection in iTunes in the iPhone screen.

Good Luck!

-Varsity

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen
Hilfreichste Antwort

3G:

For a temporary solution to an unresponsive sleep button, take and squeeze the phone between your thumb and index finger on the right or left side of the receiver (ear speaker) while you press the sleep button. For some reason or another the sleep button will work, while doing the squeeze.

Give it a try, worked for me.

War diese Antwort hilfreich?

Bewertung 1

7 Kommentare:

thanks the squeeze worked for me :)

von

the sqeeze isn't working for me. part of the case broke between the brezel and the sleep button.

von

thanks mark worked for me!

von

the squeeze did not work for me. Not sure what to do now.

von

try starting your own question

von

2 weitere Kommentare anzeigen

Einen Kommentar hinzufügen

Thanks for the help anchor, I'll give it a shot

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

thanks the squeeze worked for me :)

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

the sqeeze isn't working for me. part of the case broke between the brezel and the sleep button.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

thanks mark worked for me!

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

the squeeze did not work for me. Not sure what to do now.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

That worked for me. Now it works as normaly!!!! Many Thanks!!!!!!!

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

amazing, i wonder how you figured that out. my explanation is that the connector that connect the sleep switch to the logic board came loose somehow (like a fall or something) and squeezing that area reconnects it. Thanks much!

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 3,993