Logic board fuse blown
Hello i think i must have blown that fuse those two screws is there a way to fix it
Ist dies eine gute Frage?
Bewertung
-1
204486
1 Antwort
Gewählte Lösung
Rep: 782,3 Tsd.
1,1 Tsd.
893
2,3 Tsd.
Mtaka, that is a Diode. It is a RCLAMP2402B diode and can most likely be replaced. If you have never soldered an SMD device, you could just replace the MagSafe DC in board. runs around $10 to $15USD board
War diese Antwort hilfreich?
Bewertung
1
...and many pins seems to be damaged on the LVDS socket. Could you post a close up pict of this socket and the LVDS cable connector end ?
