Repariere deine Sachen Community Store

Das erste Modell des iPhone, Modell A1203 mit 4, 8 oder 16 GB Kapazität und einer Aluminiumrückseite. Die Reparatur erfordert erhebliches Hebeln und möglicherweise auch Löten. Diese Seite soll Nutzer:innen bei der Fehlersuche und -behebung helfen und sie bei der Suche nach Hilfe für das iPhone 2G unterstützen.

224 Fragen Alle anzeigen

Einstellungen

GSM & WIFi Antenna Replacement Procedure

Hi,

Do you have any guide, for replacing the GSM & WiFi Antenna of iPhone 2G device.

I have searched all over internet, but I can't find any useful guide for this problem. I have to change the antenna, because most of the time, the device is with "No Service" status.

Thanks for your precious help,

Andi Qirjazi

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

The antenna is part of the display assembly

you can use the display assembly guide to get to the antenna.

but, there are 3 possible hardware problems that could led to the problem you're writing about.

  1. defective antenna
  2. faulty or loose connectors/cables
  3. defective communications board

replacing the antenna isn't hard and if you see the replacement antenna, you should be able to figure out how to replace it ;-)

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

2 Kommentare:

Hi,

Thanks for your answer.

Which of the three ribbons is the antenna. I have changed LCD and Digitizer, because the digitizer has been broken. since that time, I have such problems. With wireless is the same story, it doesn't find any network at all.

Please don't tell me to buy a new iPhone :).

Thanks,

andi

von

please go out, get a new phone and send me the old one - kiddin.

CLICK for a picture of the display assembly - the brown "sticker" thing on the left is the antenna - none of the ribbons is the antenna - the 2 white cables are the connection from the communications board to the antenna - i guess they are not connected properly

von

Einen Kommentar hinzufügen

Einstellungen

I see,

Thanks for the information. Might be cables issue, because one of the connection (the one on the left that in the picture is seen clearly on the left - bottom is disconnected and seems it's the problem of the joint point in the sticker. Is it easy to change the white cables?

Thanks again for your precious help.

Andi

P.S. If you want my old phone, don't give me such valuable advices. :-P

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

3 Kommentare:

replacing the cables should be easy. arrrgh - always the same - i should stop giving advices, i should stop giving advices, i should stop giving advices, i should stop giving advices, i should stop giving advices, i should stop giving advices, i should stop giving advices....... ;-)

von

Does exist any guide, or it's DIY ;-)?

Thanks,

Andi

von

i'm not aware of a guide for that. but you can replace the two cables. the pair costs 2$ on ebay

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Andi wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 8,412