Rep: 609
5
2
We had a iPhone 6 come into the shop today and we had to do a water cleaning on it. After cleaning, the phone turns on and seems functional. The only issue is the extreme temperature warning came on and won't go away. I'd like to replace the sensor but I don't know which part it is or if it's attached to the board. Any suggestions on where it is?
Ist dies eine gute Frage?
Rep: 74 Tsd.
19
111
82
First try a different battery, there is one in the battery.
Then it gets complicated, there are some NTC probes on the board, usually they won't break but they can be shorted causing false high temp. I don't have the layout so I don't know where for sure.
War diese Antwort hilfreich?
Thank you! I swapped the battery out with another one I had in stock and it worked immediately. That's the first time I had a battery do that to me
I found a schematic, if I shared the link would it help you to identify them? I'm having the exact same problem as OP.
Same problem. After contact with the liquid and replacing lcd connector this problem came. Probebly during replacing connector, temp sensor get shorted.
I used different baterys, please help. I found in diagram only ic U1602 but am not sure. Sorry for my ENG.
Rep: 61
3
Check this solution,...
Change capacitor and resistor if damage
War diese Antwort hilfreich?
my problem was solved
thank you
Hi i have tried replace 2 new batteries, the problem is still there. I wonder where the sensor is? Probably the sensor is shorted? PLease advice, thank you.
War diese Antwort hilfreich?
I'm having same problems. Did you finish a solution to yours?
War diese Antwort hilfreich?
Im Having same issue. Did you get your problem solver. If so what did you do
Letzte 24 Stunden: 0
Letzte 7 Tage: 6
Letzte 30 Tage: 20
Insgesamt: 29,216
2 Kommentare
did you replace the battery after you cleaned the logic board?
von oldturkey03
Yes, it would not turn on with the original one in it but it powered on with the new one. I also had to change out the screen on it too.
von Munkeyunk