Rep: 49
2
Hi. I have been repairing an ipad air 2 and noticed that my replacement bonded digitizer and screen assembly came with a small flap with 4 solder points on it. Upon inspection of the broken part it became apparent that a small printed circuit was soldered to the flap with an IC on it. my guess it has something to do with cover to sleep the pad, can anyone confirm this please. Thank you.
Ist dies eine gute Frage?
Rep: 469
7
2
Yes, those components are necessary for the smart cover to work. If the part that you received doesn't have them, then you should return them for an exchange or purchase from another supplier.
War diese Antwort hilfreich?
Or - like I just did - remove the IC from the old screen by hotair(I used 300C for 2 sec) and resolder it to the pads on the new screen.
@ anders.. did it work?
Rep: 73,8 Tsd.
19
111
82
Yes that is one of the hall effect sensor for the smart cover.
War diese Antwort hilfreich?
Rep: 1
1
Has Anyone found a supplier for these chips?
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 2
Letzte 30 Tage: 4
Insgesamt: 759
1 Kommentar
Does your unit work without the small ic?
von Loren Robinson