Rep: 73
3
1
I have changed a few ipad mini 2 screens, but this one i have tried x2 digitizers and although home button works fine, the touch screen doesnt work at all. I was working before with the cracked screen. Any ideas?
Ist dies eine gute Frage?
Rep: 73
3
1
Hi Thanks for that. It looks like i have x5 copper pins missing (see image) do you think this is the cause and whats my next steps?
Thanks
ian
War diese Antwort hilfreich?
Totally repairable. Send out for digitizer fpc connector replacement. We do this every day. If you can't find someone local, we offer a mail in board repair service for people all over the world. Far less expensive than replacing the device. Look me up at iPad Rehab.
Rep: 5,3 Tsd.
9
15
4
Visually inspect where the digitizer plugs into the logic board. look for bent or missing gold pins. You may require magnification to inspect the area.
War diese Antwort hilfreich?
Rep: 5,3 Tsd.
9
15
4
Are you able to connect the old cracked screen to see if it still works? It's possible that the connector on the logic board is damaged , they are extremely fragile.
War diese Antwort hilfreich?
Rep: 73
3
1
I could not as screen was totally smashed when removed. is there a way to check damage if its the connection on the logic board?
War diese Antwort hilfreich?
Rep: 5,3 Tsd.
9
15
4
Yup that is definitely it. You will need to find someone capable of board level repairs. The connector will need to be replaced. It is a common issue , those connectors seem to be especially fragile on the mini 2.
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 1
Letzte 30 Tage: 5
Insgesamt: 318
1 Kommentar
It was so bad that was not salvaged im afraid.
von Ian Knight