Zum Hauptinhalt wechseln

Die Wi-Fi Version des iPad Mini 2. Angekündigt am 22. Oktober und erschienen am 13. November 2013. Das iPad mini 2 bringt die Pixelanzahl des iPad Air auf nur 7,9 Zoll unter.

220 Fragen Alle anzeigen

Missing solder pad on Touch screen connector iPad mini 2

Hi guys,

We have a problem.

A customer brought an iPad 2 mini. I disassembled ipad, and I realized the touch screen connector was damaged. I removed the connector with solder iron, but one of the solder pad are missing.

what is the solution ?

thanks

Tibor

picture:

Block Image

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 1
Einen Kommentar hinzufügen

3 Antworten

Gewählte Lösung

This is all wrong !!! The missing pad is 5th pad !! 5 NC - no connection !!

Block Image

Yellow selection is pad 6,

Block Image

oldturkey :D

War diese Antwort hilfreich?

Bewertung 2

7 Kommentare:

@fixlab excellent job in finding this. Amazingly enough it took a year for somebody to catch this error. I did correct the original answer.

von

No problem ;)

von

@fixlab I have the same problem. The pads number 5, 15, and 17 are missing. Colud you help me with the schematic picture? Where could I connect the missing pads? Thanks!

von

gabor, pin 5 is nc, pin 15 is ground and 17 you can connect to the large cap to the left side of the connector. on the right side of the cap

von

Thank you daniel!

von

2 weitere Kommentare anzeigen

Einen Kommentar hinzufügen
Hilfreichste Antwort

Iphoneszerviz Szeged, correction. That is contact #5 of J1700. It does not need anything. NC no connection

Block Image

War diese Antwort hilfreich?

Bewertung 6

6 Kommentare:

Very useful, Thank you!

von

By placing a jumper from the cable to the board?

von

thank you old turkey, :)

von

@oldturkey03 extremely grateful!

von

@iphoneszerviz, did you manage to repair this? Can u post a pic or explain a little what you had to do exactly? We are facing a similar prblem ourselves with the exact same pad ripped off during a connector replacement

von

1 weiteren Kommentar anzeigen

Einen Kommentar hinzufügen

Iphoneszerviz Szeged,

try to use best or recommended rework tools when you touching high tech logic boards. Here i can see one path Path damaged on your logic board.

you have two options,

1) Change the new logic board

2) Path modification : check the path destination and you may have to connect them physically

All the best!

War diese Antwort hilfreich?

Bewertung 2

3 Kommentare:

circuity diagram available this iPad?

von

creativeelectron (http://creativeelectron.com/) seeking your support to find path of 8th contact - TP

von

jessabethany, seeking your support as well

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Iphoneszerviz Szeged wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 9

Insgesamt: 4,732