Zum Hauptinhalt wechseln

Die zweite iPad-Generation mit WiFi, GSM und CDMA Modellen. Einige Modelle wurden noch einmal aufgepimpt vor dem iPad 3. Die Reparatur ist schwierig und verlangt Hitzezufuhr und Hebeln.

730 Fragen Alle anzeigen
Frage geschlossen

Screen goes off when the back is tapped

I have an ipad2 wifi, works fine except if you tap it in certain places the screen goes off and you have to press the lock button to wake it up again.

no visible damage on the chassis but asking the owner (he's asked me to fix it) says it goes off if you tap near the ribbon cable area (left hand side bottom half) mostly.

i suspect a faulty ribbon cable to lcd but also think it could be a faulty lock button shorting?

any ideas?

thanks

dyfed

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

I would probably say the same thing; those LCD cables seem to want to fall off to no end.

Not sure if you've ruled this out already, but it's good to cover all bases: It might be the auto-lock feature. If you can consistently replicate the problem though, with auto-lock off, I'd just remove the digitizer and reconnect the LCD cables.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 9

Letzte 30 Tage: 10

Insgesamt: 51