Rep: 43
2
4
So i took my old iphone 5c that is icloud locked by some random person on ebay and I took the screen off that and put it on MY old 5c that had a broken lcd. Now after i did that the new screen wont light up unless i push really hard where the flex cables click into the logic board, how can i fix this problem? I didn't see anything stopping it from fully clicking or overall any problems.
Ist dies eine gute Frage?
Rep: 784,3 Tsd.
1,1 Tsd.
894
2,3 Tsd.
hyrqBot check the connector very carefully. Check for any bend or folded over contacts.
War diese Antwort hilfreich?
Also check for any debris in the FPC connectors, I often use a tooth brush and isopropal alcohol to clean the connectors, be sure to disconnect the battery first and wait till all the alcohol has gone before reconnecting, just to be sure that the contacts are clean.
i cant disconnect the battery, i dont have a heatgun to melt the glue under it. I have tried to remove it before and it like really fking stuck in there
just unplug it
oh right, thanks
if the connector looks fine and you feel that it is ceded in all the way than the screen is more than likely defective
War diese Antwort hilfreich?
no, i put the screen back on the original phone and it works 100% fine, there is a small phantom touch but it lights and reacts to touch.
Letzte 24 Stunden: 0
Letzte 7 Tage: 0
Letzte 30 Tage: 2
Insgesamt: 117
