Repariere deine Sachen Community Store

Model A1419 / Ende 2012 / 2,9 und 3,2 GHz Core i5 oder 3,4 GHz Core i7 Processor, ID iMac13,2

330 Fragen Alle anzeigen

Einstellungen

iMac does not start , does not turn diagnostic LEDs

My problem is due to a 27-inch iMac Late 2012 Quad Core Processor 2.9, was replacing the HDD of this machine, the Mac I then lit the job done. Shut down your Mac and try to light again but this no longer wanted to turn more.

I have tried to make it on again, and change the power supply, replace the battery of Mother Board, Remove all electronic parts and place in anti-static bags but the iMac does not react. When connecting your iMac to the electric current, is not none of the LEDs lights of diagnotico.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 2
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

Check the wall plug. You should at least get #1 diagnostic light on if it is getting power.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

3 Kommentare:

Saw that my power cord esta working well, the perobarlo with another iMac.

Included with another probe power supply UN in good esatdo iMac .

Still not turn me any diagnostic LEDs . UN to Perform battery replacement Madre Y NO results have Baord .

Case I think it's a little more advanced by what is presented .

von

I suspect that you got a bad replacement power supply. Use a multimeter to test if you are getting power to it. Thanks for the email and posting the question.

von

Believe me it is a source taken from another iMac , which works in perfect condition. I think the problem esta linked to the logic board , appreciate any help from you or other members lls .

And thank you for the help .

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Claudio Castillo wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 386