Rep: 11
1
Hi, I'm from Sweden and I believe we have different sizes. I have about 5 hex keys the same size but none work. Does anyone know which size I need? I tried ordering a 1/8th inch (?) hex key but it was way too big (suggested at another forum).
I would be so happy. Otherwise, does anyone know how to remove screws without the proper hex key?
Picture below.
Ist dies eine gute Frage?
Rep: 685,3 Tsd.
3,4 Tsd.
1,1 Tsd.
2,6 Tsd.
That looks like a security torx screw (see if there is a pin in the middle of it). Take a look at these: http://www.ebay.com/itm/like/23116976979...
Here is the Service Manual on your machine: http://www.manualslib.com/manual/438779/...
War diese Antwort hilfreich?
Thanks! Will look into it.
Success! I bought a starter kit of torx keys :) Let's see if I manage to fix the printer.
I have no idea if you can actually fix it but you will be able to get into it.
Letzte 24 Stunden: 0
Letzte 7 Tage: 1
Letzte 30 Tage: 4
Insgesamt: 907
1 Kommentar
this is not a hex key it is a torx
von Jimfixer