Zum Hauptinhalt wechseln

A revision to the original PSP 300x, released in 2010. Repair is just as easy.

10 Fragen Alle anzeigen

Psp 300x Backlight Fuse

Hi Guys!

I have my old PSP 3001, I drop it on the floor. Still turn On and Off, but with out image...

I replacentment the LCD, but still not working.

So I found out that is a BACKLIGHT FUSE,

Please some one tell me

"WHERE IS THE BACKLIGHT FUSE"?

I am tired to find out and get no result!

Thanks all guys who read and help!

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 1
Einen Kommentar hinzufügen

2 Antworten

There is only a backlight fuse. There is no screen fuse. There is either a problem with the screen, or one of the components on the motherboard. Probably the IC that is in charge of video.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Try checking component ic4104. That's the backlight driver and is located in the 11,C quadrant of side A on a TA-085 v1 board. The part number is TB62752BFUG. Test each connected capacitor to ground in continuity mode with a basic multimeter for a short. If one or more of the capacitors are shorted remove those and check the pads where the capacitors were. If there's still a short on both pads where the capacitors were then put back the original ones. Odds are if there's a short to ground but doesn't go away when you remove the capacitors then TB62752BFUG needs to be replaced.

PSP 2k Schematics (~95% 3k)
https://gamingdoc.org/technical-document...

TB62752BFUG Datasheet
https://www.mouser.com/datasheet/2/408/T...

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Josemar Pereira wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 8

Insgesamt: 360