Zum Hauptinhalt wechseln

Das iPhone 6 mit dem 4,7 Zoll Display ist die kleinere Version des iPhone 6 Plus und kam am 19. September 2014 auf dem Markt. Es hat die Modelnnummern A1549, A1586 und A1589.

4994 Fragen Alle anzeigen

TouchID not working after rear camera replacement

I recently replaced my rear camera since it stopped working after the phone was dropped. The replacement was quick and straightforward, but it appears that I've lost my TouchID after the repair. I've read that the TouchID ribbon and home button are integral to the process.

I removed the heat shield the closely inspected the ribbon and have yet to find any damage to the ribbon itself, but with each subsequent reassembly, I'm always met with the "TouchID can't be activated" disclaimer when booting up the device.

What I've tried so far:

- Hard reset

- Soft reset

- Reset network settings

- Reset all settings

- Inspected connections at logic board and near the home button

- Replaced entire assembly (heat shield/TouchID ribbon)

I'm completely stumped with this device as of right now. Any suggestions would be greatly appreciated!

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 1
Einen Kommentar hinzufügen

3 Antworten

I would try a new long flex and update software

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

I tried this too! I replaced the entire heat shield and flex cable and updated to iOS 10.0.2, but I'm still getting the error.

von

Einen Kommentar hinzufügen

First, put the original Touch ID button and ribbon back in the phone. That's the only way to get the Touch ID functionality back. I'd also try running a restore from a computer.

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

I replaced the original ribbon and double checked everything before reassembling, but TouchID functionality wasn't restored. I'll try restoring from my computer next.

von

Einen Kommentar hinzufügen

Not exactly an answer, but I've not been able to restore touch ID on two phones since the arrival of iOS 10. Original home button on both. Would therefore very much like to hear if you resolve this.

War diese Antwort hilfreich?

Bewertung 0

6 Kommentare:

I don't see that you've tried a DFU restore. Final step in the desperation process.

von

I'll definitely make sure to post anything if I manage to restore the TouchID finctionality. I've yet to try a DFU restore. What is that exactly?

von

I fixed mine. I tried this: (moving a small metal heat shield over from my broken screen) Touch ID not working after screen replacement? THEN a DFU restore

http://www.payetteforward.com/how-to-put...

von

Consider me jealous. I did a DFU restore last night - which is a little different with iOS 10, and TouchID functionality still hasn't been restored. Even better, my screen began flickering after the process, but I restored from a backup and corrected that. Still stumped on the TouchID though.

von

The flickering screen is a total mystery, but the point I was trying to make is try unplugging your home button, then plugging it back in very carefully & firmly. Then DFU again.

von

1 weiteren Kommentar anzeigen

Einen Kommentar hinzufügen

Antwort hinzufügen

Marc wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 17

Insgesamt: 651