Dead area on my screen
I have a dead spot on my ipad, along the length of the screen about a half inch from the edge. Top only. How do I energize this dead spot?
Ist dies eine gute Frage?
Bewertung
0
356582
1 Antwort
Gewählte Lösung
Rep: 21,2 Tsd.
5
19
70
Hi,
It's either a faulty part, or you have crimped the digitiser cable causing it to have a dead zone, I would highly recommend getting a replacement part. :-)
War diese Antwort hilfreich?
Bewertung
2
2 Kommentare
The dead spot came out of the blue, the ipad did get dropped and cracked the screen. Even though the screen was cracked everything works fine
The cracked screen was replaced, I double checked the connections and they were nice and tight also pushed in as far as they could go in. The new screen works fine except for the dead spot.
Is it possible that the new screen might be defective? Is there other procedures I need to try?
Carl
von Carl Real
I rechecked connections 4 times and very confident that connections are secure and tight. Like I said, before the dead spot showed up with the new digi. The cracked digi that was replaced was functioning properly.
von Carl Real