Rep: 16,1 Tsd.
39
92
13
Hello,
I have my friends iPod. He said the home button was stuck down and it would show the Apple logo when connected to iTunes. I fixed the home button easily, the plastic piece just broke. But, I charged it, and tried to tun it on. The only response was a black screen that lit up. I've done hard reset, rebooting, etc. but it won't work. Still just stuck on black screen with backlights.
halp plz
Ist dies eine gute Frage?
Rep: 221,4 Tsd.
15
289
807
Hey @gigabit87898. Have you tried DFU Mode? If you have tried all the software tricks for a device stuck on the startup logo, this could be related hardware or a bad Tristar. Sometimes we get thrown off by coincidental damage (the button) and it takes a while to realize the problem lay elsewhere.
I would try new battery, charge port, display (if you have one) after all the software tricks. If nothing, then it is probably a board problem. I have never seen an iPod schematic so I don't know if they exist. It is A5 based so probably similar to the iPhone 4S in concept at least.
War diese Antwort hilfreich?
I tried a different display and the same thing, black screen with backlight. The iPod connects to iTunes, it lights up when I hit buttons, etc. I can even put it into recovery. How do you put it in DFU? I can't remember...
How to would I get the data off of it first?
That's why they pay us the big bucks...NOT!
Tough one for sure. If iTunes recognizes it, can you do a backup or does it require a password or "trust"? If the data is important, DFU is pretty much last resort. You could open it up and check the FPC connectors for the LCD & Digi to see if anything is amiss.
Look at this picture I added to my answer, you will note that Tristar is below the NAND. That's also a shotgun approach. Try probing for some shorts.
Hopefully, someone else has some ideas.
Letzte 24 Stunden: 0
Letzte 7 Tage: 2
Letzte 30 Tage: 7
Insgesamt: 1,231
1 Kommentar
i got the same problem also
von Eric Ho