Zum Hauptinhalt wechseln

Aufpolierte Version des iPhone 3GS mit schnelleren Verarbeitungsgeschwindigkeit. Die Reparatur geht ähnlich wie beim 3G vonstatten und braucht nur einfache Schraubendreher und Hebelwerkzeuge. Modell A1303 mit 16 oder 32 GB Kapazität mit schwarzer oder weißer Kunststoffrückseite.

1500 Fragen Alle anzeigen

Internal connector 7 broken.

Guys, I really need your help! I was trying to glue smashed connector 7 to the board connection and made it bad. Now I have absolutely no signal and have no idea what to do next. Please help me with some kind of fix. Both parts of that connection are BAD now :(

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

3 Antworten

Gewählte Lösung

Try taking a small thin copper wire with a small amount of solder on each end. Place it directly in the center of the logic board 7 female connection. Heat up the wire so the solder makes a solid connection on the logic board. Then apply generous amount of solder on the male 7 connection coming off the dock. Connect the two wires and you should get full reception on your antenna.

Good Luck.

“I am so clever that sometimes I don't understand a single word of what I am saying.” Oscar Wilde.

War diese Antwort hilfreich?

Bewertung 3

3 Kommentare:

The 7 connection goes to the wireless antenna sticker that resides on the back of the 3GS dock assembly. You can order the antenna on the net for cheap and iFixit has plenty of content on how to replace it.

von

Parker, thanks for your help! I'll try to do it topmorrow morning. I'll reportto you on the result...

von

sounds like a good fix-should work.

von

Einen Kommentar hinzufügen
Diese Antwort bezog sich ursprünglich auf eine andere Frage.

antenna flex connection.has small gold prong on right side to connect to bezel

War diese Antwort hilfreich?

Bewertung 2

2 Kommentare:

I don't know for sure, but I always thought that ribbon was related to the internal compass...

von

Einen Kommentar hinzufügen
Diese Antwort bezog sich ursprünglich auf eine andere Frage.

The 7 connection goes to the wireless antenna sticker that resides on the back of the 3GS dock assembly. You can order the antenna on the net for cheap and iFixit has plenty of content on how to replace it.

Try taking a small thin copper wire with a small amount of solder on each end. Place it directly in the center of the logic board 7 female connection. Heat up the wire so the solder makes a solid connection on the logic board. Then apply generous amount of solder on the male 7 connection coming off the dock. Connect the two wires and you should get full reception on your antenna.

Good Luck.

“I am so clever that sometimes I don't understand a single word of what I am saying.” Oscar Wilde.

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

Antwort hinzufügen

Felix wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 2,809