Zum Hauptinhalt wechseln

A 12.2-inch "prosumer" tablet released in February 2014. Powered by a custom version of Android 4.4 KitKat.

40 Fragen Alle anzeigen

My tablet will not turn on after some DIY repairs

My tablet had screen flickering issues and after some research, I decided to unplug the battery and reconnect. Little did I know that the battery connector on the motherboard breaks off super easy. So then my only option was to re-solder the pins to the connectors, which I did but it still won't turn on. Some of the connectors won't accept the solder so I super-glued them, but still nothing. Any advice would be great, I called UbreakIfix and they said the base cost of repair would be over $300, which I cannot afford. Should I call Samsung? Thank you for any help.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

luke.puller , Very big mistake using the super glue for trying to make a electrical connection as it could do the opposite and become an isolator. Probably best to just take it into a good local computer/cell phone repair shop and have them take a look and estimate repair. The whole board can be purchased for $120.00 and can probably be found used for a lot less if need be. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

http://www.ebay.com/itm/OEM-Samsung-Gala...

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

Antwort hinzufügen

luke.puller wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 1

Letzte 30 Tage: 15

Insgesamt: 127