Zum Hauptinhalt wechseln

Released Q2 2009, identified on serial number sticker as 'nuvi 1200'

2 Fragen Alle anzeigen

Device continually reboots during map loading stage

When starting the GPS the progress bar displays, but once it gets to the 'Loading maps' stage it reboots and starts the cycle over again.

I tried doing a factory reset (by booting while touching the bottom right of the screen). When the screen asked if I wanted to do a factory reset the 'Yes' and 'No' buttons were unresponsive.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Punktzahl 0
Einen Kommentar hinzufügen

MacBook Akku Fix Kits

Ab $69.99

Buy Now

MacBook Akku Fix Kits

Ab $69.99

Buy Now

3 Antworten

1. Try connecting to a PC!If successful,

2. Connect to computer, & do a forced re-install of the map.

War diese Antwort hilfreich?

Punktzahl 0
Einen Kommentar hinzufügen

Next thing I would try would be to crack open the case (Provided there is no warranty), seperate all of the parts, ensuring that all cable , - or plug connections are seperated, get some aluminium foil, & foam rubber, press the rear of the board, - boards onto the al foil. This completly discharges everything, - allowing for a fresh re-boot. microscopically check for any corrosion, and clean off if any found.

Re-assemble, plugging in the battery last. And then re-boot. Remember, - use fabric gloves, and keep yourself earthed. I have had more success with this aproach than failures.

War diese Antwort hilfreich?

Punktzahl 0
Einen Kommentar hinzufügen

Call up garmin support and have them walk you through reflashing the firmware through the boot block method. This will reflash the device's firmware to the latest version and may fix the issue where it reboots during the loading maps.

War diese Antwort hilfreich?

Punktzahl 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Zachary Landau wird auf ewig dankbar sein.
Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 6

Letzte 30 Tage: 21

Insgesamt: 4,501