Zum Hauptinhalt wechseln

Aufpolierte Version des iPhone 3GS mit schnelleren Verarbeitungsgeschwindigkeit. Die Reparatur geht ähnlich wie beim 3G vonstatten und braucht nur einfache Schraubendreher und Hebelwerkzeuge. Modell A1303 mit 16 oder 32 GB Kapazität mit schwarzer oder weißer Kunststoffrückseite.

1500 Fragen Alle anzeigen

replaced broken screen and display is dim

I replaced my broken a screen and it works but it is extremely dim. I went to brightness, cranked it up, but it did not change it. Since i bought two 3GS screens, i installed the second one, but had the same results.

Anyone have an idea?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
1 Kommentar

by screen do you mean just the front display glass or entire display including lcd

von

Einen Kommentar hinzufügen

5 Antworten

Gewählte Lösung

My suggestion here is that you do not have the backlight working. Easy for me to guess since I am not looking at your phone. Check out this site and see if it makes sense for your to fix your phone the way it is described. I mean you would have to be pretty unlucky to buy nothing but broken screens. Possible? yes but very unlikely. Just my 2 cents...here is the site http://blog.techsick.com/guides-tutorial...

War diese Antwort hilfreich?

Bewertung 1

2 Kommentare:

i agree with your 2 cents

von

ah...it is blown. the people before me did try to install a 3G screen into the 3GS phone....no way for me to fix it at this point.

thanks for the help all

von

Einen Kommentar hinzufügen
Hilfreichste Antwort

Are the screens original Apple replacement ones, or cheap generic screens? I'm wondering if that may be the trouble. Do you have any screen, cracked or otherwise, that is original which you could temporarily connect and will give an indication of brightness level? You could then confirm that it isn't another hardware issue within the phone, but is actually the new screen.

War diese Antwort hilfreich?

Bewertung 1

2 Kommentare:

the display assemblies were purchased via IFixit

von

oh..and i have put the original cracked screen back in and the same problem exists.

von

Einen Kommentar hinzufügen

hmmm....make sure your lcd is connected properly...connection number 2....try a hard reboot by holding the top and bottom button together for like 10 secs

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

i have already done that with two new screens? any other options?

von

Einen Kommentar hinzufügen

had the same problem. tried everything but checked the settings and saw that the settings were turned down. turn it all the way up and see what you find.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Water Damage to the logic board will cause the back light on the LCD to function improperly. Or you might have two broken LCD need to try an LCD you know is working. Good Luck

"That's a bummer man! It's uh...it's a bummer." -The Dude

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

rdt wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 3,217