Repariere deine Sachen Community Store

Modell A1418 / Ende 2012 / 2,7 & 2,9 GHz Core i5 oder 3,1 GHz Core i7 Prozessor

212 Fragen Alle anzeigen

Einstellungen

Logic Board Faulty or Damaged?

Hello There... I was wondering if someone can give some clue what is happening in this situation..:

problem: iMac won't turn on...

tests:

1. Removed lcd/glass panel successfully, I notice that NONE diagnostic led was on... so...

I went..:

2. I checked de AC cable, and it gave me the 120V AC from the outlet so we are good...

3. checked inside AC input in the Mac, and also gave me the 120V AC... (good)

4. I plugged in the PSU, and tested some pins with the ground pin... and 3 pins gave me 12V DC. (so I think the PSU is fine)

What else can I try????

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

The PSU may receive power but is not sending further to the board, before going after a logic board damage i would try with a new power supply. Most of the cases when no diagnostic led is on the board doesn't receive power due to a faulty power supply.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

5 Kommentare:

@kaykay another one hits 500

von

even though the PSU pinout gave me 12V DC on 3 pins?... I will try another psu..

von

Always keeping an eye out for me @mayer. Thank you :)

von

Hello there, after all.. I installed a new PSU, the imac start working again... but.. after several hours the iMac was on.. it turned off... so I checked again inside, and I have no leds on... (again)... I have no clue what is happening...

von

@makibuki //have u found problem. i have the same issue

von

Einen Kommentar hinzufügen

Antwort hinzufügen

jbermudez27 wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 253