Zum Hauptinhalt wechseln

Zweite iPhone Generation. Modell A1241 mit 8 oder 16 GB Kapazität und schwarzer oder weißer Kunststoff-Rückseite. Die Reparatur ist leichter zu bewerkstelligen als beim iPhone 1. Es werden Schraubendreher, Hebelwerkzeuge und Saugnäpfe benötigt.

1170 Fragen Alle anzeigen

No display Not recognize by iTunes After Repair

I was going to check the LCD and forgot to turn off the iphone before taking LCD From logic Board . returned every thing back but iphone doesn’t start , iTune not recognize it , I used all methods to reset but no chance Did I fry the Logic board by not turning it off before taking apart? can this be fix? thank you

Update (01/23/2011)

I got it today Form repair shop . they told me that Motherboard was effected and they change some IC on the Board , i don't know whats that , but its working fine , i opened the phone and its same motherboard and same LCD . i don't know what they did actually

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

-Check contact points for burn marks.

-Test LCD in other iPhone

-Do a hard reset as well

-Flip ringer up/down to see if vibrator responds

War diese Antwort hilfreich?

Bewertung 0

2 Kommentare:

No you cannot. You will need to test the LCD into another iPhone 3G. The 3Gs will not work.

Find a friend with a 3G and swap it. If your LCD comes up fine, may be your logic board.

I personally never turn a phone off when changing the LCD or Digitizer.

von

No Burn marks

Nothing with hard reset (Home+Power)

No vibration

can i use LCD on 3GS ?

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Mahmood wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 979