Repariere deine Sachen Community Store

Das Apple iPhone 5s wurde am 10. September 2013 angekündigt. Die Reparatur dieses Geräts ist ähnlich wie bei den Vorgängermodellen und erfordert Schraubendreher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA mit 16, 32 oder 64 GB in silber, gold und space grau.

3530 Fragen Alle anzeigen

Einstellungen

iPhone wont turn on after removal of rear camera

So, I had to remove the rear camera for work reasons. When i removed the camera, I re-assembled the phones components and the phone worked without problem. I was able to re-install the camera recently for a vacation, but after i removed the camera again the phone would not turn on. Any suggestions about what could possible be going on?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

Removing or installing a rear camera should not kill a phone...

Is the phone recognized by iTunes when you connect it with a Lightning cable to an iTunes enabled computer? If so, shine a bright flashlight on the screen to see if you have a dim image. A dim image would point to a backlight issue. Not being recognized would point to a more serious logic board issue.

A few things I can imagine happening are:

  • You may have damaged the camera connector on the logic board which could be causing a short circuit. Do a good visual inspection.
  • You may have accidentally dislodged some components on the logic board, in the area surrounding the connectors. This can happen when we pry the connectors with our nails, tweezers or plastic prying tools. Again, do a thorough visual inspection, preferably with magnification, to see if you notice anything wrong.
  • If you have been disconnecting the battery prior to your camera removals, check the battery connector and that surrounding area as well.

So start checking and report back.

War diese Antwort hilfreich?

Ja Nein
Bewertung 3

1 Kommentar:

I verified that the phone still is recognized by iTunes but the dim image would not appear on the screen. I did some more looking around and saw that the connector cables between the logic board and the screen were damaged. I switched the screen out and the phone worked just fine. Thanks.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Landon Nielsen wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 44