Rep: 181
5
hi replace an digitizer of an ipad 3th and the home button is not working but if i jump the 2 gold prong where the home button make is contact the lcd open...
i tried an other home button and usb flex same problem
Ist dies eine gute Frage?
Rep: 61
1
Hello, most commonly, the home button module on the digitizer is not aligned properly. It is important to check the orientation of how the old home button was installed on the old or original digitizer that was removed. If you have aligned it properly, I would highly recommend for you to order a new home button.
War diese Antwort hilfreich?
Rep: 241
3
1
Check the bracket placement and that there's no adhesive over the edge keeping the button from sitting too high causing no contact.
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 9
Letzte 30 Tage: 13
Insgesamt: 82
