Rep: 13
4
I changed the display screen with new one, turned on and get a white screen? checked all connections, even plugged in broken screen and it still lit up on part of glass not cracked. any ideas?
Ist dies eine gute Frage?
Rep: 13
4
The original screen had a small crack after falling off a desk and the bottom half of the screen was not working. Ordered a replacement screen and the replacement screen was faulty.
War diese Antwort hilfreich?
Rep: 685,3 Tsd.
3,4 Tsd.
1,1 Tsd.
2,6 Tsd.
surely this is a software problem. Try starting up from an external USB device with a known good system on it. If it boots, run Disk Utilities from the external drive and see if that will do the trick.
War diese Antwort hilfreich?
Rep: 5
1
Maybe you have not connected all the wires. If it is not of this then you will need programming pairing which only Apple does, and because you replaced the screen yourself they may not do it because it is Apple .
War diese Antwort hilfreich?
Never heard of that before. There is no programming a screen.
I like to see some validation of this programming pairing. Could you give us a link?
Letzte 24 Stunden: 0
Letzte 7 Tage: 4
Letzte 30 Tage: 15
Insgesamt: 212
2 Kommentare
What happened with the previous screen to need a replacement ?
von arbaman
Daughter dropped off desk and cracked the screen, ultimately had to send to Apple and was fixed
von herrky