Repariere deine Sachen Community Store

Anleitungen zur Reparatur und zum Zerlegen von Apples Time Capsule.

151 Fragen Alle anzeigen

Einstellungen

What adhesive do I use on the rubber cover?

I followed all of the steps to replace the hard drive and everything worked out great. However the rubber cover on the bottom does not want to stick back all of that well. Following the guide I was able to peel back the the cover to just where the screws are located and never removed the entire cover.

I was wondering what others had used, double stick tape does not seem sticky enough to me. I have tried using a hair dryer on a low to medium setting and it did fairly well.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

3 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

I'd say rubber cement would probably be a good choice, as it is only semi-permanent but still holds well. Remove the old adhesive to make the surfaces as smooth as you can and then paint a thin coating of rubber cement on the inner side of the cover as well as the face of the case that it mates to. Let the rubber cement dry for a while, then press the pieces together. Just make sure you get it aligned the first time, it produces a surprisingly strong bond.

War diese Antwort hilfreich?

Ja Nein
Bewertung 5

4 Kommentare:

+ works for me

von

+ and me as well

von

Thanks I will try that. I wonder if that is what Apple used in the first place as it was really stuck on when i tried to remove it.

von

I've always wondered what the Apple OEM adhesive is as well. It seems like they use the same semi-permanent adhesive somewhere on nearly every device that they manufacture.

von

Einen Kommentar hinzufügen

Einstellungen

You should try this

http://www.gorillaglue.com/glues/supergl...

or this

http://www.supergluecorp.com/super-glue/...

in my experience rubber cement never works on plastic.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

2 Kommentare:

The time capsule has a rubber bottom cover that mates up to a steel plate, so rubber cement should be OK for this application. I'd be leery to use super glue for this because it produces such a permanent bond that you'd be screwed if you had to take the device apart again in the future.

von

the only thing I use super glue for is to repair skin lacerations. It's a PITA if you ever have to replace anything again. Just my 2 cents

von

Einen Kommentar hinzufügen

Einstellungen

Don't glue it back on. It's part of the problem.

Reassemble the Time Capsule with holes in the rubber and metal base for ventilation. Drill holes through them before reassembly. Double sided tape works good enough to hold the rubber on and allows easy removal if it needs to be opened again for HDD access.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Jhan Jensen wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 5

Letzte 30 Tage: 20

Insgesamt: 5,360