Repariere deine Sachen Community Store

Modell A1502 / 2,6 GHz (Turbo Boost bis zu 3,1 GHz) oder 2,8 GHz (Turbo Boost bis zu 3,3 GHz) Dual-Core Intel Core i7 Prozessor mit 4MB geteiltem L3 Cache.

494 Fragen Alle anzeigen

Einstellungen

Display does not turn on

My display was cracked but still worked. I followed these instructions: MacBook Pro 13" Retina Display Mitte 2014 Displayeinheit austauschen

to replace it and it was very simple, however the screen did not turn on. I double checked the connections and it still would not display. I thought maybe I just purchased a bad display. I reattached my old display and it will no longer turn on. Any ideas of what may have happened? I made sure to read all of the comments on each step and was very cautious to not damage the logic board or its components. I'm at a loss since I know the original display turned on without issue prior to the change.

Block Image

Block Image

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

Can you hear the fans spinning? if not make sure you connected the battery. I often forget to do that!

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

7 Kommentare:

The Mac turns of for sure. I hear the chime, I see the keyboard lights turn on and can hear the fans. I've even attempted an SMC reset and NVRAM reset in case the system had something to do with it. Thank you though.

von

The display is fine. The backlight is not coming on. Shined a light through the apple and I can see the login screen. Anyone know how I possibly could have blown the fuse with the battery disconnected?

von

Even though there was no image on the screen was there still a backlight on the old one? did the apple logo still light?

von

Prior to changing the screen the backlight on the old display came on. After changing the backlight no longer comes on at all for either display. I see no visible damage to the connector. I just used my multimeter to test the fuse and there doesn't seem to be a problem with the fuse but I added a picture because one side does look a bit burnt. What else could be wrong?

von

Did you ever spill anything on the laptop? or are the lines around it just dust?

von

2 weitere Kommentare anzeigen

Einen Kommentar hinzufügen

Einstellungen

My guess you blew something in the backlight circuit when you changed the screen. Maybe you forgot to disconnect the battery. It will be savable, but you need to find someone who does motherboard repair.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

I definitely didn’t for get to disconnect the battery. I followed the Ifixit guide very carefully to prevent something shorting out. Do you think there could be something wrong with the new display that could have caused this? I’m a bit worried that if we fix the logic board the display will just fry what ever is causing this again.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Gonzo Neko (KitiClub) wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 8

Insgesamt: 515