exact location of tiny black rubber spacer for proximity sensor

Question

iPhone 4

Vierte iPhone Generation. Die Reparatur an sich ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. GSM mit 8, 16 oder 32 GB Kapazität, Modell A1332 in schwarz und weiß.

2375 Fragen Alle anzeigen

cosmintds @cosmintds

Rep: 23

1

Veröffentlicht: 16. Mär 2011

Einstellungen

exact location of tiny black rubber spacer for proximity sensor

Hello,

I've managed to change the display assembly using iFixit guide, all good, except for the fact that this little black rubber shaped like a halfpipe fell out when i took the mainboard out, and i don't know where it belongs.

I didn't find anything specific in the guide, so i left it out.

After this, the proximity sensor works very erratic.

Can you please ad some more info into the guide related to this problem?

Thank you very much

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 1

Einen Kommentar hinzufügen

3 Antworten

Gewählte Lösung

Kainx @kainx

Rep: 43

2

Veröffentlicht: 23. Mär 2011

Einstellungen

the position is between the mainboard and lcd/touch cables

War diese Antwort hilfreich?

Ja Nein

Bewertung 1

2 Kommentare:

Thank you very much, Kainx. I'll try that right away. Hopefully, the sensor will work fine again. Take care

24. Mär 2011 von cosmintds

i dont think the proximity sensor function will improve after installing the rubber spacer, unfortunately.

i'm having an issue with my prox sensor after a color LCD swap.. seems to work only out doors under bright sun :(

12. Apr 2011 von Mike D

Einen Kommentar hinzufügen

Thank you very much, Kainx. I'll try that right away. Hopefully, the sensor will work fine again. Take care — cosmintds
i dont think the proximity sensor function will improve after installing the rubber spacer, unfortunately.

i'm having an issue with my prox sensor after a color LCD swap.. seems to work only out doors under bright sun :( — Mike D

bikerjodie @bikerjodie Rep: 91 4 2 1 · Answer 1 · 2011-04-06T01:29:23-07:00

bikerjodie @bikerjodie

Rep: 91

4

2

1

Veröffentlicht: 6. Apr 2011

Einstellungen

As you look in the iphone, the black rubber goes along the top of the main board and hooks round, it protects the lcd ribbon cable from being scratched my the main board....

War diese Antwort hilfreich?

Ja Nein

Bewertung 1

Einen Kommentar hinzufügen