Repariere deine Sachen Community Store

Repair guides and support for LED, LCD, HD and other Vizio TVs.

933 Fragen Alle anzeigen

Einstellungen

D55u-d1 Gets logo then powers off.

So of course my Vizio TV is out of warranty. Recently I have an issue where the logo will display but after 10 seconds it powers off. Being out of warranty I replaced the main board myself to no avail. Before I waste more money solving this problem does anyone have any ideas as to what would cause this problem?

All the boards look good, I don't see any signs of blown capacitors, I'm just wondering what my next step should be, replace power board or replace t-con board.

Vizio tells me it can't be a firmware issue nor will they release the firmware to me.

Any ideas?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0

1 Kommentar:

After talking to tech support from their third party company it sounds like a screen issue....if that's the case it's not cost effective to fix. Anyone else dealt with a power issue on screen itself?

von

Einen Kommentar hinzufügen

3 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

If you change the logicboard , then check if there is any other board inside, then check for the backlight if it works.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

3 Kommentare:

Backlight works I can see it power on with the back panel open. There are 3 other boards, but I found a total repair kit for $70 that includes all the boards, so I just bought it. I'll regut the whole thing and that should solve any issues I'm having.

Thanks,

Dan

von

Alright, if you change it all and not work there is no other way

von

lol that would be my luck!! Vizio support is no help.....they make it sound like only absolute trained professionals should replace these parts.....sorry Vizio your LED tv's are much easier to fix than the 5 DLP's i've brought back to life!

von

Einen Kommentar hinzufügen

Einstellungen

Regutted entire TV, nothing solved the problem....i'm believing it's a firmware issue yet no one will release the firmware to me....anyone happen to know where I could get it?

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

Did you figure out the solution?

von

Einen Kommentar hinzufügen

Einstellungen

You have a bad EEPROM in the main board, its what sends the start boot to the CPU, its a common failure, and a $10 part but a little tricky to replace unless you are real good at soldering, its only a 8 pin chip but very small, a replacement main board will also fix the issue but that board isn’t cheap

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

Do you know the part number?

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Dan Ritchie wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 4

Letzte 30 Tage: 13

Insgesamt: 1,160