Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

The Kenmore 80 Series is a popular washing machine manufactured by Kenmore.

64 Fragen Alle anzeigen

No power after heavy load

We decided that it would be a grand idea to wash a large rug in the our Kenmore Series 80 washer. Doh! It got halfway through and lost power. The tub is still full of water.

I've confirmed that the unit has power to the control board. I can't find a fuse anywhere.

I'm not sure what to try next. The control board is only about $5, but it has no visible damage to it.

Is there a service manual for the Series 80 around somewhere? Any other ideas for troubleshooting?

I'm afraid I burned out the motor but it's a fair amount of disassembly (plus manually draining the water) to check that.

Wiring diagram that I found:

Block Image

Control board:

Block Image

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 2

Kommentare:

Are you getting any error codes? What will it do?

von

No error codes—it's old enough it doesn't have a display. It has no power, won't drain, none of the switches do anything. I've got 120V voltage to the control board, but that's it. It's dormant!

von

Flip that board over and look for burn marks.

von

Einen Kommentar hinzufügen

iPhone LCD Display Fix Kits

Die Budgetoption, abgedeckt durch unsere lebenslange Garantie.

Kits kaufen

iPhone LCD Display Fix Kits

Reduziere die Reparaturkosten, nicht die Qualität.

Kits kaufen

1 Antwort

Gewählte Lösung

If it stops spinning AND it's still full of water, it could be the lid switch is broken. It may have cracked or something when the rug was rocking and rolling in your washer.

Found this on youtube:

War diese Antwort hilfreich?

Bewertung 6

Kommentare:

Great suggestion, and that's a solid video that I hadn't found. Thanks! I tried shorting that connector and nothing happens. The switch itself feels reasonably sound. The connector is reading 0V at both pins, which makes me think the problem is upstream somewhere. Hmm…

von

Hey, it turns out you were right after all! I took it completely apart and tested just about everything. No dice. Then I realized that I had the dial set to the wrong setting: the start of the wash cycle, but I didn't have water hooked up. So nothing was happening. I shorted the switch pin again and flipped it to spin dry, and it worked! Just installed a new lid switch and it worked great. What a good learning experience.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Kyle Wiens wird auf ewig dankbar sein.
Statistik anzeigen:

Letzten 24 Stunden: 7

Letzten 7 Tage: 36

Letzten 30 Tage: 140

Insgesamt: 2,800