Zum Hauptinhalt wechseln

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

2690 Fragen Alle anzeigen

iPhone 6s stuck on Apple Logo

Hello!

I have problem with really stubborn Apple Iphone 6s...

Some time ago it has just turned off. After connecting to charger phone just shows apple logo, reset itself and it goes on and on...

My first guess was to replace u2 tristar module, but with no effect.

When stuck on apple logo, phone takes 0,14a.

Im able to get it to recovery mode, but when trying to restore, itunes shows 4005 error.

Anybody has idea what to do? Maybe some pads under u2 are broken?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

Do you know if anything happened to the phone prior to this event? That might give you a clue on where to look. Tristar could cause this and if you aren't 100% confident that the replacement went smoothly, you could try again and while you have the chip removed, probe the pads.

However, if that doesn't help, you should consider probing the PMIC outputs for shorts and proper voltage. It could be something else which is dragging down the system. If the PMIC looks good, then take a look at PMU_RF to see if those outputs are good as well.

That's a lot of probing but it should help you find the fault.

War diese Antwort hilfreich?

Bewertung 2
Einen Kommentar hinzufügen

Try to put it in DFU mode and perform a flash. If it fails, there might be problem with the soldering of the U2.

War diese Antwort hilfreich?

Bewertung 2
Einen Kommentar hinzufügen

Antwort hinzufügen

m serwis wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 863