Zum Hauptinhalt wechseln

Model A1013, A1052, A1085, or A1107 / 1440x900 screen resolution

121 Fragen Alle anzeigen

LCD Inverter, Cable, or Screen?

Hi,

Initially, I thought I had a bad logic board until I reset PMU & PRAM, formatted hard drive, and then reinstalled OS 10.5. Boots fine now with no boot/startup issues.

So, my current issue is that I have an screen that has colored vertical lines, a dual image, and a significant black area. Video works flawlessly when connected to an external monitor. Thoughts on whether this could be just an inverter/cable ? Or is it likely the entire lcd ?

See attached pics to see what I'm getting.

http://www.heifetzconsulting.com/images/...

http://www.heifetzconsulting.com/images/...

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

It is not the inverter that only affects the backlight. It could be the LVDS cable or it is not seated properly in the sockets. If the problem gets better or worse by you moving the upper part of the laptop at the hinge it is the LVDS cable, unless you find a bad connection at either end of it. If you haven't found your problem yet then the LCD will need replaced.This guide covers the procedure for LCD replacement. You would use the same guide to replace the LVDS cable. There are several models of your laptop. Please give us the last 3 digits/letters of your serial number and we will locate the correct parts for you.

War diese Antwort hilfreich?

Bewertung 3

3 Kommentare:

I def have the 1.67Ghz Low Res, the A1107

von

Display data cable/LVDS are here: [verlinktes Produkt fehlt oder ist deaktiviert: IF155-046]

von

The LCD is here: [verlinktes Produkt fehlt oder ist deaktiviert: IF155-049]

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Clint Wagner wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 2,307