Zum Hauptinhalt wechseln

CDMA Version des iPhones der vierten Generation. Die Reparatur ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. Modell A1349 mit 16 oder 32 GB, CDMA Kompabilität.

294 Fragen Alle anzeigen

replaced power button now black screen with vib every few seconds

My power button had not been working for a while. So I decided to replace it to see if that would fix it. After the button install my phone will not power on. When I plug it into the computer or charging cable the screen remains black and it vibrates every few seconds. When I turn vibrate off through the side buttons it beeps every few seconds. I cannot get it to power back on. I tried to do a factory restore through iTunes and it said there was an issue and was not successful.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Perhaps you disconnected more than you were supposed to. Make sure the screen is properly connected to the motherboard, and check whether the power button isn’t constantly being pressed in by something inside.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Meagan Schober wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 2

Insgesamt: 49