Rep: 11
2
Hi There, this is Paul from Australia!! I have a PowerBook G4 Aluminum 17" 1 GHz.... I have broken the track pad ribbon connector on my logic board. My question is, can I purchase the PowerBook G4 Aluminum 17" 1.67 GHz logic board and put it in my computer? Thank you for your time....I love your site!!!
Best from Down-under!!,
Paul Gurry
Ist dies eine gute Frage?
Rep: 87,6 Tsd.
161
82
213
Unfortunately, just about every part for the 1.67 GHz machines are different.
You could conceivably go as high as 1.5 GHz, if you replaced the following parts:
However, that would be an expensive proposition. Sorry for the bad news!
War diese Antwort hilfreich?
Hi Ben, Thanks for your help with this!!! time to throw the powerbook on the scrap heap I think..... It did work with an external keyboard but now the ribbon connector is totally broken I can't power it up!! Can you think of any other way I can power up this powerbook... I've tried an external usb keyboard with a power button with no luck! thank you again, Paul
Well, I normally wouldn't suggest this, but if you're throwing it away anyway....
How handy are you at soldering? The reason I ask is because there are two metal pads on the logic board (about 1 inch above the notch that the upper case cable feeds through) with the writing "Power Button" to the right. You could try soldering a wire to one, another wire to the other, and installing a switch between these 2 wires that could hang out of the computer...
But that's all I got...and it's not much :)
Hey Ben, Thanks for that tip! your a champ mate!!! I'll give it a go!!!! Cheers, Paul
Letzte 24 Stunden: 0
Letzte 7 Tage: 1
Letzte 30 Tage: 4
Insgesamt: 909
