Zum Hauptinhalt wechseln

Repair and disassembly guides for the Nerf Elite Triad EX-3 released in 2013.

1 Fragen Alle anzeigen

Dart not going all the way in

The darts will not sit all the way in the chamber. They will slide out about a 1/2 in, this not fire correctly

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Hilfreichste Antwort

nerf guns are picky about their ammo sometimes, that gun in particular is really picky, darts from HB or Walmart nock-offs have slightly different inner diameter then Nerfs….. also kids chewing on them doesnt help in my experience. . my kids will eat anything..

War diese Antwort hilfreich?

Bewertung 1

1 Kommentar:

I have the same problem. It is just one chamber, all the time. Doesn’t matter which darts (I’m only using the 3 Elite darts that came with the gun.... since it’s my child first one). The other two chambers always work and the third chamber always pops the darts out an inch. I’ll probably try to dissemble and see if I can figure out what’s going on

von

Einen Kommentar hinzufügen

So as its not going in fully i taped some paper to the dart shown in the below picture and it worked cause it was loose

Block Image

Block Image

Block Image

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Raymond Hylton wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 9

Insgesamt: 661